CS2 Pressure Switch
Compact and rugged design with a field adjustable setpoint.
- Features & Benefits
The CS2 pressure switch (0.4-2.5 kg/cm² bar) is built to a compact and rugged design, ideal for hydraulic power units and wellhead controls.
Its suitability for corrosive environments and resistance to chemical attacks ensures the CS2 is a pressure switch built for long term usage with low maintenance costs, although similar to the GR Series the CS2 is newer with a better power margin.
Complete with either Intrinsically safe or flameproof approvals for use in Zone 0 or Zone 1 hazardous areas respectively.
• Compact & rugged design.
• Approvals for Zone 0 & 1 – ATEX/IECEx
• Stainless Steel weatherproof enclosure.
• Suitable for corrosive atmospheres and chemical attacks.
• Maximum process temperature up to 120 degrees.
• Field adjustable setpoint.
Accuracy: Set point repeatability ± 1% of span at 20°C / 68°F
Storage Temperature: -40°C to +60°C / -40°F to +140°F
Ambient Temperature: -25°C to + 60°C / -13°F to 140°F
Maximum Process Temperature: See Documentation
Enclosure Classification: IP66 / NEMA 4X
Switch Output: SPDT snap action hermetically sealed microswitch
Electrical Rating: See Technical Data Sheet
Process Connection: ¼ NPT Internal
Approximate Weight: 0.6kg / 1.32lbs to 2kg / 4.4lb depending on model
Standards: ATEX / IECEx Flameproof Ex d. ATEX / IECEx Intrinsically Safe Ex ia.
Country of Origin: EC
As part of the Compact series of pressure switches, a wide range of specifications and configurations to suit individual requirements: Find out more at www.delta-mobrey.com >